Bicester Soundproofing Products

Tel: 01993 704810

 

Sta-Stuck Aerosol Adhesive

 


HELP                    HOME              CONTACT US              SITE MAP              PRODUCTS

 

 

Sta-Stuck

Sprayable Contact Adhesive for most Soundproofing Materials

     

 

 

Offers good bond strength

Heat resistant up to 250oF/121oC

Low odour

Water resistant

Adjustable nozzle

Reduced application time

 

Applications

An easy to use aerosol contact adhesive that can be used to fix a wide range of our soundproofing materials including sound absorbing acoustic foam and sound barrier mats.

Directions

Shake can well before use (especially in cold conditions)  Best results are obtained when working in an ambient temperature of 70oF/21oC with surfaces to be bonded properly conditioned.  Ensure all surfaces are thoroughly clean and free from moisture, dirt, dust and grease or any other materials that could affect the bond.  For vertical or horizontal patterns, turn tip in spray nozzle clockwise to adjust the spray pattern.  Hold spraycan 6 to 8 inches from the surface and apply in even coats, making sure the adhesive 'webs' across the surface.  Do not hold closer than 6 inches or 'wet' the surface.  It is important the adhesive 'webs' across the surface and 80 - 100% coverage is achieved.  One surface should be sprayed vertically and the other horizontally.  Do not concentrate in one spot or allow the adhesive to 'puddle'.  Double coating applications are recommended on porous surfaces (after the first coat has dried, apply a second coat evenly on top).  Allow adhesive to tack (approx 1 minute) unless working at normal room temperatures and it is not too warm then bond together with a firm pressure over the entire area.  Tack time can vary depending on climate conditions.  It is important that maximum uniform pressure is applied to over the entire area bonded to achieve maximum bond strength.  Although the adhesive is low odour, it is advised to still use the Contact Adhesive in well ventilated conditions.

Other information

Can size

15oz (426 grams)  

Coverage

6-8m2/can  

Colour

Clear  

Spray Pattern

Variable  

Copyright 2007 Bicester Products Ltd.