soundproofing tiles   sound proofing tiles   sound insulating tiles   soundproofing material   acoustic tiles

foamsorption acoustic tiles fitting instructions

bp

BICESTER PRODUCTS LTD

Soundproofing Specialists & Suppliers



  

FOAMSORPTION

ACOUSTIC TILES

Foamsorption sound absorbing tile

Fitting Instructions

The installation of all Foamsorption tiles is simple and quick hence the cost of installation is extremely low.  Foamsorption tiles are simple to cut with a sharp knife and glued into position with our special adhesive.

Foamsorption adhesive allows for accurate alignment and location of tiles.  A 5mm shadow gap should be left between the tile joints which help to give a perfect optical impression.  Clean gloves should be worn when handling and installing the tiles.

Foamsorption surface preparation

cutting Foamsorption to size

applying adhesive

glued up tile

Fitting Foamsorption tile

  
1. Make sure both the tiles and the surface to which the tiles are being applied are free from dust and dirt.
2. Cut the end of the adhesive tube to produce a bead.
3. Place the Foamsorption Tile pattern side down on a clean, flat surface.
4. Apply a bead of adhesive along all four edges of the tile.
5. Apply three more beads of adhesive within the tile area (see diagram)
6. Immediately press the tile against the surface it is to be adhered to and position
as required.

FOAMSORPTION acoustic tiles are produced in pairs, ie. handed positive and negative.  When bonding these tiles, start in the centre of the area and work outwards.  Each row should commence with the opposite hand than its predecessor and alternate from row to row.

FOAMSORPTION  acoustic tiles should be stored in a completely dry and room temperature environment.  They are designed for installation under standard occupancy conditions from 10-25oC and not more than 60% RH in an enclosed building.

The contractor shall be responsible for the examination and acceptance of all conditions and project suitability prior to the acoustic tile installation.

 

BACK TO FOAMSORPTION PAGE

 

For more information

Click this link to contact us

 

Copyright 2007 Bicester Products Ltd.

floating floor insulation, floor soundproofing, home, industrial noise control, noise insulation, noise control enclosure, noise a