soundproof a wall



Soundproofing Specialists & Suppliers


Soundproof a Wall


A recycled rubber soundproofing material designed to upgrade the sound insulation properties of party walls in the home and all types of domestic properties.  The ideal solution to reduce noise from a neighbour with the minimum loss of room space using this new concept for soundproofing walls. 


Soundproofing for walls


Noise reducing soundproofing for walls       Noise reducing soundproofing for walls

soundproofing for walls       Most effective on lightweight and single skin walls

soundproofing for walls    Simple DIY installation

domestic home soundproofing     Easily cut and supplied in handy sized panels

domestic home soundproofing    Minimum loss of roomspace (Less than 50mm)

M20AD soundproofing for walls


Produced from recycled rubber for effective

sound insulation

of airborne noise through party walls

This new soundproofing for walls is designed to absorb and reduce the amount of airborne noise which penetrates poorly insulated party walls. Easy to fit, this 20mm thick insulation is simply glued to the existing wall with two layers of 12.5mm plasterboard bonded on top and is an easy solution if you are disturbed by noise from your neighbours

The soundproofed wall shown in the detail on the right of this page had a sound insulation value of  48dB DnT,W+Ctr which is approx. an 87% reduction in sound transmission and complies with the requirements of the latest Approved Document E Building Regulations.  It is therefore, ideal for insulating walls separating stairs and hallways where space is at a premium.

Please note: however, this soundproofing system is only effective at reducing normal noise levels which should not usually be heard.  Loud music and bass noise will always be audible although it's intensity will be reduced.


floating floor

Click on here to see Test Certificate

See illustrations below to see how M20AD sound insulation can improve the sound blocking properties of a stud partition.





Uninsulated stud partition

M20AD applied to one side of a stud partion

Fully soundproofed stud partition using M20AD on both sides

12.5mm plasterboard each

side of 75mm studs

at 600mm centres

Plus one layer of M20AD plus

two additional layers of

plasterboard to one side only

Plus one layer of M20AD plus

two additional layers of

Plasterboard to both sides




Nominal partition

thickness (mm)

Approx. weight (kg/m2) Fire resistance (hours)

Expected sound loss with no infill


Max. expected sound loss with AMW75 infill


1 100 19 1/2 30 34
2 145 91 1/2 40 45
3 190 125 1 42 47


The estimated acoustic performance of the stud partitions shown above are for partitions with no holes and all joints properly sealed. The sound insulation performance indicated may vary from site to site and should only be used as a guide.


Key Benefits

Easy DIY installation

Minimum loss of roomspace

Excellent sound barrier qualities                                              FITTING INSTRUCTIONS


''M20AD - I have to admit to some scepticism regarding your claims for this product, but after installation I am amazed at the difference it has made, so much so that I am now about to start on the upstairs rooms".                                                          C Poulter - Rochester 

For more information   Click this link to contact us


soundproof a wall

Copyright 2007 Bicester Products Ltd.